Search results for "Low-density polyethylene"
showing 10 items of 99 documents
Thermoplastic starch and green tea blends with LLDPE films for active packaging of meat and oil-based products
2019
International audience; Thermoplastic starch (TPS) is an alternative biomaterial that can be used to produce bioplastics to replace petroleum-based food packaging. Active films were developed from acetylated cassava TPS and green tea using the blown extrusion process. Green tea (GT) and TPS from native starch (NS) and acetylated starch (AS) with different degrees of substitution (DS) were extruded with linear low-density polyethylene (LLDPE) at LLDPE/TPS-GT ratios of 70/30 and 60/40 prior to blown-film extrusion. Results indicated that a higher DS of AS enhanced melt flow index which altered processability and subsequently impacted film microstructures and physical and barrier properties. N…
Filmability and properties of compatibilized PA6/LDPE blends
2005
Blends of low density polyethylene (LDPE) and polyamide 6 (PA6), compatibilized with an ethylene-acrylic acid copolymer (EAA), either alone or combined with a low molar mass bis-oxazoline compound (PBO), have been processed in film blowing operations and the properties of the films have been investigated. Without of compatibilization, the filmability of the blend was very poor and no significant specimen was collected. As a result of the reactive compatibilization, the blends with EAA and even more with the EAA-PBO, were processed successfully in film blowing. The films of the quaternary blends were shown to possess satisfactory mechanical properties as a result of fine and stable morpholog…
Rheological and Mechanical Behavior of LDPE/Calcium Carbonate Nanocomposites and Microcomposites
2012
The increase of the interest in polymer nanocomposites has been leading to continuous growing search toward nanofillers alternative to the widely known clay-based ones. One of these possible alternatives is represented by calcium carbonate nanoparticles, which have not been widely investigated in such context. In this article, a study on the rheological and morphological behavior of dif- ferent low density polyethylene-calcium carbonate nanocomposites, compared with a reference calcium carbonate microcomposite, is presented. Several different nanosized calcium carbonates at different amounts were used. The results from the rheological and me- chanical tests outlined that only minor changes …
Edible Arabinoxylan-Based Films. 1. Effects of Lipid Type on Water Vapor Permeability, Film Structure, and Other Physical Characteristics
2002
Arabinoxylans (AX) are natural fibers extracted from maize bran, an industrial byproduct. To promote this polymer as a food ingredient, development of edible coatings and films had been proposed. Indeed, composite arabinoxylan-based films were prepared by emulsifying a fat: palmitic acid, oleic acid, triolein, or a hydrogenated palm oil (OK35). Lipid effects on water vapor permeability (WVP), surface hydrophobicity (contact angles), lipid particle size, and mechanical properties were investigated. Results showed that OK35-AX emulsion films had the lowest WVP. Emulsified films presented a bimodal particle size distribution; however, the smallest particle mean diameter (0.54 microm) was obser…
The chloro‐substituent enhances performance of 2,4‐bis (imino)pyridylchromium catalysts yielding highly linear polyethylene
2020
The five unsymmetrical 2‐[1‐(2,4‐dibenzhydryl‐6‐chlorophenylimino)ethyl]‐6‐[1‐(arylimino)ethyl]pyridine compounds (aryl: 2,6‐Me2Ph L1 , 2,6‐Et2Ph L2 , 2,6‐i Pr2Ph L3 , 2,4,6‐Me3Ph L4 and 2,6‐Et2–4‐MePh L5 ) were prepared and characterized with FT‐IR and 1H/13C NMR spectroscopy as well as elemental analysis. The treatment of L1 – L5 with CrCl3·3THF affords the corresponding chromium chloride complexes (Cr1 – Cr5 ) in excellent yields. The molecular structures of Cr2 and Cr3 characterized by X‐ray diffraction show a distorted octahedral geometry with three nitrogen atoms and three chlorine atoms around the metal center. On activation with either MAO or MMAO, Cr1 – Cr5 collectively display hig…
Preliminary Results on the Use of Leather Chrome Shavings for Air Passive Sampling
2012
A new passive sampler based on low-density polyethylene (LDPE) layflat tube filled with chrome shavings from tannery waste residues was evaluated to determine volatile organic compounds (VOCs) in indoor and outdoor areas. VOCs were directly determined by head space-gas chromatography-mass spectrometry (HS-GC-MS) without any pretreatment of the sampler and avoiding the use of solvents. Limit of detection values ranging from 20 to 75 ng sampler−1and good repeatability values were obtained for VOCs under study with relative standard deviation values from 2.8 to 9.6% except for carbon disulfide for which it was 22.5%. The effect of the amount of chrome shavings per sampler was studied and resul…
Polypropylene and poly(ethylene-co-1-octene) effective synthesis with diamine-bis(phenolate) complexes: Effect of complex structure on catalyst activ…
2017
A series of group 4 metal complexes bearing amine-bis(phenolate) ligands with the amino side-arm donor: (μ-O)[Me2N(CH2)2N(CH2-2-O-3,5-tBu2-C6H2)2ZrCl]2 (1a), R2N(CH2)2N(CH2-2-O-3-R1-5-R2-C6H2)2TiCl2 (R = Me, R1, R2 = tBu (2a), R = iPr, R1, R2 = tBu (2b), R = iPr, R1 = tBu, R2 = OMe (2c)), and Me2N(CH2)2N(CH2-2-O-3,5-tBu2-C6H2)(CH2-2-O-C6H4)TiCl2 (2d) are used in ethylene and propylene homopolymerization, and ethylene/1-octene copolymerization. All complexes, upon their activation with Al(iBu)3/Ph3CB(C6F5)4, exhibit reasonable catalytic activity for ethylene homo- and copolymerization giving linear polyethylene with high to ultra-high molecular weight (600·× 103–3600·× 103 g/mol). The activi…
Properties of radiation-modified blends of polyethylene with elastomers and liquid crystalline copolyester
2001
The results are given on the effect of γ-irradiation on properties of blends of high and low-density polyethylene (HDPE, LDPE) with elastomers -ethylene/propylene/diene rubber (EPDM) and chlorinated polyethylene (CPE), and thermotropic liquid crystalline polymer (LCP). The morphological, thermal, mechanical properties (including thermosetting properties) and adhesion properties of blended composites were investigated. A special attention was paid to the applicability of the blends as thermosetting materials (TSM). The LCP used was a copolyester of poly(ethylene terephthalate) with p-(hydroxybenzoic acid) in the ratio 40: 60. It was found that addition of LCP essentially influenced the therm…
Recycling of plastics from packaging
1997
Plastic waste coming from the separate collection of packaging film was recycled and characterized. The material is a blend of low density and linear low density polyethylene and after recycling shows mechanical and rheological properties depending on the processing conditions and apparatus. High processing temperature and high residence times strongly enhance the degradation processes and reduce the mechanical properties, in particular the elongation at break. A possible use of this recycled plastic is for the production of low pressure pipes but the properties are lower than those of virgin pipe grade polyethylene. By introducing additives, like antioxidants, inert fillers and impact modi…
Small-angle x-ray scattering experiments for investigating the validity of the two-phase model
1973
A New method for evaluating SAXS curves of polymer samples with lamellar structure is applied to two typical scattering curves measured with a solution-crystallized linear polyethylene and a melt-crystallized branched polyethylene respectively. The method permits a rigorous check of the validity of the two-phase model and yields, without additional measurement, the volume fractions of the two phases and the difference in their densities. The densities can than be obtained by measuring the overall density of the sample. The results are: ρc = 0.996 g/cm3,ρa = 0.854 g/cm3, wa = 0.20 for the solution-crystallized sample; ρc = 0.967 g/cm3,ρa = 0.850 g/cm3, wa = 0.36 for the melt-crystallized sam…